Loading... Please wait...



Categories

Popular Brands

Our Newsletter


If you have questions about the sealing process, just contact us and we will happily answer your questions


1

Screw the metal sealing plate on wooden handle in case is not already mounted. 
Be careful to not to over tighten the plate as this can damage the insert in wood handle. 

2

Rub the seal over the pre lubricated fabric before each seal stamping to prevent the wax from sticking to the seal plate. if this happens, you can remove the wax by placing the seal in the freezer a few minutes and when it is cold remove the wax from the plate using a toothpick. 
3   Place the wax bar about 3 cm above the surface you are applying the seal to to avoid wax from splashing. Melt the wax bar placing its tip on the blue part of a lighter flame which should be besides the bar, not bellow, to prevent the sealing wax from smoking.

4

Melt enough sealing wax slightly larger that the size of your seal and give it a circular shape using the tip of the wax bar. Allow the wax to cool down by waiting 5 to 10 seconds. Press the seal on the melted wax. 

To seal another document repeat from step 2. 
If the seal gets too hot, allow it to cool down before use it again.